-
Attwood Engine Compartment Fan 24v 4″
62.00 €Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated…
-
-
Dock ladder 4 steps galvanized
228.00 €Hot galvanized steel, wooden steps. For use in fresh water. If you have a ladder in the water all year round, you should treat the wood to protect it from…
-
-
Flag Pole Mahogany 125cm
69.00 €Mahogany flagpole
Length 125cm
Slot width 32mm
The set includes a brass sleeve with a length of 60 mm (fits a 32 mm slot) -
-
-
-
Foldable dock ladder 4 steps
Original price was: 255.00 €.199.00 €Current price is: 199.00 €.Hot-dip galvanized steel folding boat bridge ladder/stair with 4 composite steps. For use in fresh water. A very strong and durable ladder. Height above the dock: 610 mm. Height below…
-
Rope ladder 4 steps
39.00 €A rope ladder with plastic pipes between the steps ensures stability. Collapsible for easy storage.
Step distance: 20 cm
Width: 30 cm
Steps: 4 -
Telescopic 3-step ladder with handles
202.00 €Telescopic ladder with handles made of AISI 316 stainless steel. For platform mounting. Dimensions: 370X360 mm
-
Ventilation Grid 452x87mm beige plastic
25.00 €UV-resistant ABS plastic, suitable for overpainting.
External dimensions: 452 x 87 mm
Internal dimensions: 405 x 55 mm -
Ventilation Grille 325x112mm stainless
25.00 €Ventilation grille with 5 holes, stainless steel.
External dimensions: 325 x 112 mm
Inner dimension: 300 x 88 mm
Height: 25 mm -
Flag pole stainless steel 1250mm
55.00 €Classic tapered style made of polished stainless steel AISI316. Suitable for 25 mm sockets.
-
Flag pole stainless steel 620mm
30.00 €Classic tapered style made of polished stainless steel AISI316. Suitable for 25 mm sockets.
-
Flag pole stainless steel 750mm
41.00 €Classic tapered style made of polished stainless steel AISI316. Suitable for 25 mm sockets.
-
Flag pole stainless steel 900mm
48.00 €Classic tapered style made of polished stainless steel AISI316. Suitable for 25 mm sockets.
-
Marco Signal Horn SK2 (low+high)
313.00 €Single electromagnetic horn with stainless steel trumpet. Powerful acoustic unit carefully protected and manufactured of non-corrosive materials, complete with fixing hardware.
Noise level: 320 Hz / 370 Hz
… -
Dome vent with light passage
44.00 €Dome vent polished stainless steel cap with light passage.
Diameter 200 mm
Installation hole diameter 101 mm
Height 50 mm -
-
-
Rutgerson Dome Vent (stainless steel)
160.00 €RUTGERSON dome vent with polished steel cap. Can be closed from inside.
Diameter 173 mm
Installation hole diameter 100 mm
Height 40 mm -
Seaworld Signal Horn (high sound)
88.00 €Noise level: 378 Hz
Horn length: approx. 39 cm
Cone diameter: 102 mm
Power consumption: 5 A @ 12 V DC -
Seaworld Signal Horn (low+high)
175.00 €Noise level: 327 Hz / 378 Hz
Horn length: approx. 45 cm
Cone diameter: 190 mm
Power consumption: 10 A @ 12 V DC -
Fender Cleat 55mm
4.00 €Length 55mm
Bottom length 40mm
Bottom width 26.5mm
Height 23mm
Stainless steel -
Fender Bracket 42mm
Original price was: 5.00 €.4.00 €Current price is: 4.00 €.Width (B) : 34
Lenght (L) : 42
Width of opening (C) : 10
Depth (T) : 34
Stainless steel
-
Pop-out Fender Holder
48.00 €Diameter (D) :47
For rope-Ø :8-13
Thread (GW) :M34
Clamping area :4-25
Depth (T) :81
Clean and elegant design. Pull and turn the knob to position, allowing quick and effortless work on attaching or removing… -
Fender Holder V2
26.00 €Centre distance (A) :11.5
Drilling diameter (BD) :4
Width (B) :32
For rope-Ø :6-10
Lenght (L) :53
Depth (T) :17
One-hand operation. Concealed fastener design for a clean appearance. Designed for fender hook or storage hook… -
Fender Holder V3
26.00 €One-hand operation
Concealed fastener design for a clean appearance
Designed for fender hook or storage hook for hats or towels
Spring loaded hook secures the line firmlyCentre distance (A) : 20 mm
Depth (T) :…
Deck Equipment
- Home
- Deck Equipment
Telefon: 50 43 242 | Aadress: Kadaka tee 84a, Tallinn 